Cable KGTP 4x1.5 power flexible EUROPAN CABLE (T040356)

Description

K·HTP – kabelʹ hnuchkyy z izolyatsiyeyu ta obolonkoyu z termoelastoplastu. Sfera zastosuvannya Pryznachenyy dlya pryyednannya peresuvnykh mekhanizmiv do elektrychnykh merezh na nominalʹnu zminnu napruhu 660 V chastoty do 400 Hts abo postiynu napruhu 1000 V. Kabli sylovi hnuchki pryznacheni dlya vykorystannya v promyslovosti, budivnytstvi, transporti ta silʹsʹkomu hospodarstvi, dlya nestatsionarnoho prokladannya, dlya pryyednannya peresuvnykh mashyn (pidyomnykh kraniv, telʹferiv, zvaryuvalʹnykh aparativ toshcho), mekhanizmiv ta obladnannya do elektrychnykh merezh ta do peresuvnykh dzherel elektrychnoyi enerhiyi. Konstruktsiya Strumoprovidni zhyly - midni, bahatodrotovi (klas 5 DSTU EN 60228). Izolyatsiya zhyl ta obolonka z termoelastoplastu. Ekspluatatsiya Kabelʹ pryznachenyy dlya pryyednannya peresuvnykh mekhanizmiv do elektrychnykh merezh pry temperaturi navkolyshnʹoho seredovyshcha vid -60°S do +50°S. Minimalʹnyy radius vyhynu ne menshe 8 diametriv kabelyu pry dopustymiy temperaturi nahrivannya strumoprovidnykh zhyl do 75°S. Roztyahuyuchi zusyllya na kabelʹ povynni buty ne bilʹshe 19,6 N (2,0 k·hs) na 1 mm kv. sumarnoho pererizu vsikh zhyl. Kabelʹ mozhe buty prokladenyy bez poperednʹoho pidihrivu pry temperaturi ne nyzhche -15°S. Kabeli z nominalʹnym pererizom osnovnykh zhyl do 4 mm kv. vklyuchno i chyslom zhyl vid dvokh do p'yaty vklyuchno povynni buty stiykymy do bahatorazovykh perehyniv cherez systemu rolykiv strumovym navantazhennyam i vytrymuvaty ne menshe 30000 tsykliv perehyniv. Kabeli z nominalʹnym pererizom osnovnykh zhyl do 4 mm kv. vklyuchno (odnozhylʹni i z chyslom zhyl ponad p'yatʹ) i kabeli z nominalʹnym pererizom osnovnykh zhyl 6,0 mm kv. i bilʹshe povynni buty stiykymy do bahatorazovykh vyhyniv na kut ±p/2 rad pry nominalʹnomu roztyahuyuchomu zusylli 49 N (5,0 k·hs). Tsina za 1 metr. 1 713 / 5 000 KGTP – flexible cable with insulation and sheath made of thermoplastic elastomer. Scope Designed for connecting mobile mechanisms to electrical networks with a nominal alternating voltage of 660 V with a frequency of up to 400 Hz or a constant voltage of 1000 V. Flexible power cables are intended for use in industry, construction, transport and agriculture, for non-stationary laying, for connecting mobile machines (cranes, hoists, welding machines, etc.), mechanisms and equipment to electrical networks and to mobile sources of electrical energy. Design Conductor cores - copper, multi-wire (class 5 DSTU EN 60228). Core insulation and sheath made of thermoplastic elastomer. Operation The cable is designed to connect mobile mechanisms to electrical networks at ambient temperatures from -60°C to +50°C. The minimum bending radius is not less than 8 cable diameters at an allowable heating temperature of conductive cores up to 75°C. The tensile forces on the cable must not exceed 19.6 N (2.0 kgf) per 1 mm2 of the total cross-section of all cores. The cable can be laid without preheating at a temperature not lower than -15°C. Cables with a nominal cross-section of the main cores up to 4 mm2 inclusive and a number of cores from two to five inclusive must be resistant to repeated bending through a roller system with a current load and withstand at least 30,000 bending cycles. Cables with a nominal cross-section of the main cores up to 4 mm2 inclusive (single-core and with more than five cores) and cables with a nominal cross-section of the main cores of 6.0 mm2 and more must be resistant to multiple bends at an angle of ±π/2 rad at a nominal tensile force of 49 N (5.0 kgf). Price per 1 meter.