Limit switch for GW De Gier (SP.ENDS.03)

Description

In order to adjust the limit switch system it is necessary that the limit switch is electrically connected in accordance with the De Gier wiring diagram. The following steps must be taken to adjust the limit switch system; 1. Remove the black plastic protective cover of the motor gearbox. The limit switch assembly (7, in red) is now visible. 2. Check that the adjusting rings (3b) on the knurled nuts are loose (3a), so that both complete switch nuts (3) can easily be turned by hand on the threaded shaft (1). 3. Turn the output shaft of the motor gearbox to its start position. This can be done either manually or electrically; Manually; by rotating the shaft of the electric motor with a hexagon key in the shaft of the motor. A drill with a hexagonal key can also be used (maximum 250 rpm). Electrically; by means of a control box. Check if the running direction is correct.