-180x100.png)
Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Features
All characteristics
Description
DOL 26 - Capacitive Feed Level Sensor 18 MM, SCR/PNP/NPN, IP69K DOL 26 is a complete line of 18 mm capacitive sensors. Due to their design, the 18 mm DOL 26 sensors are ideal for use in areas with limited space in agricultural and livestock enterprises. The versions with angled cable routing are particularly well suited for feeders in poultry houses or pig houses. The very low standby power consumption allows several sensors to operate in parallel on one contactor. This allows monitoring of several augers. DOL 26 sensors are virtually immune to EMI short circuits and overloads. There is no risk of sensor failure due to installation errors.Benefits and warranty
High quality
The equipment is manufactured by leading European manufacturers, using modern technologies and materials.
Professional support
Our specialists are always ready to provide qualified advice and assistance in choosing equipment. We also offer a full range of services from installation to maintenance and repair.
Competitive prices
Direct contracts with manufacturers allow us to offer competitive prices for all equipment. You will receive high quality at the best price.
Returns and Exchanges
We provide the opportunity to return or exchange the product within 14 days after purchase if it does not fit or has defects.
Delivery
Nova Poshta 
By courier in Kiev 
Pickup in Kyiv 1A Academician Korolev Avenue9
Оплата
Payment in cash
Payment Apple Pay / Google Pay
Payment by installments Monobank
Payment online Visa / MasterCard
Payment by card - Cash on delivery "Nova Poshta"
What is the DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M capacitive sensor and what is it used for?
The DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M capacitive sensor is a universal sensor with a thyristor output (SCR), designed to operate in a wide voltage range (AC/DC). This model is an ideal solution for upgrading existing systems, as it can be connected directly to 220V or 24V control circuits without additional power supplies.
The key feature of this modification is the NC (Normally Closed / Break) operating logic. This means that the sensor keeps the contact closed as long as the hopper is empty, and opens it when the feed level reaches the sensor, stopping the feed.
Main advantages of the capacitive sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M
- Universal power supply (SCR). Operates in the range from 20 to 280 V alternating or direct current (AC/DC). This allows it to be used in different countries and types of electrical networks.
- "Break" function (NC). Designed for safety: in the event of a power failure or cable break, the system will automatically stop, preventing accidental feed overflow.
- Wired connection (2-wire). Simple connection scheme in series with the load (for example, a contactor coil), which simplifies installation.
- Built-in timers (2T). Allows you to set the operation delay to avoid "flashing" of the system during vibrations or partial filling.
Application of the capacitive sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M
Due to its specification, this sensor is most often used:
- As a full hopper sensor ("Stop" sensor). It is installed at the end of the feeding line to stop the motor when filling.
- To replace mechanical limit switches. The electronic SCR sensor is more reliable because it has no moving parts.
- In systems without transformers. Where there is no 24V line, this sensor is connected directly to the AC control voltage.
- In hoppers under silos. The compact M18 housing is easy to cut into plastic transitions.
Why the capacitive sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M
This model is the choice for those looking for versatility and simplicity. You do not need to worry about the polarity of the connection or the presence of a DC power supply.
| Parameter | Value for this model |
| Output type | SCR (2-wire AC/DC) |
| Supply voltage | 20 – 280 V (universal) |
| Output function | NC (Break / Open) |
| Setting | (2T) Sensitivity + Delay |
Installation of capacitive sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M
Attention to connection: This is a 2-wire sensor. It is connected in series with the load (relay coil). Do not connect it directly to the network as a "plug in the socket" without load - this will cause a short circuit.
- M18 mounting: Install the sensor in the hole. Due to the NF design, make sure that there is no metal around the sensor head within a radius of 10-15 mm.
- Calibration: Adjust the "TIME" trimmer to ignore short signals and the "SENS" trimmer to clearly detect food.
- Comparison of the DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M capacitive sensor with analogues
What is the difference between the SCR version and other models:
| Characteristics | DOL 26 SCR (DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M) | DOL 26 PNP/NPN | Mechanical flag |
| Current type | AC / DC (Universal) | DC (Direct current only) | Mechanical contact |
| Reliability | High (non-contact) | High | Medium (wearing out) |
| Connection | 2 wires | 3 or 4 wires | 2 wires |
Choose this model for easy integration into AC circuits without unnecessary power supplies.
Features Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
All characteristics
Reviews (0)
There are no reviews for this product.
Buy together with Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Specification Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Reviews Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
There are no reviews for this product.
Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
Questions Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
There are no reviews for this product.
Capacitance sensor DOL 26-CA-P-M18-NF-CA-SCR-M-2T 10M (105114)
