Wire APVngd 50 mounting EUROPAN CABLE (55063)

Description

APVngd is a wire with an aluminum core and polyvinyl chloride insulation, which does not support combustion with reduced smoke and gas emission. Scope of application It is intended for electrical installations during stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machines at a nominal voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V. It is used for laying in steel pipes, hollow channels of building structures, on trays, for installing electrical circuits, for installing lighting networks inside rooms, for laying power lines that cannot be moved. If it is necessary to carry out external wiring, it is necessary to use trays, boxes, cable channels that protect the wire from mechanical damage and ultraviolet radiation. The wire with the "ngd" index is most suitable for use in places with an increased probability of ignition and where special fire prevention measures are required to protect people. An additional property of the wire is non-flammability and low smoke emission during exposure to high temperatures. Construction Conductive wires - aluminum, single-wire or multi-wire (class 1, 2 DSTU EN 60228). Insulation from polyvinyl chloride plasticate, which does not support combustion with reduced smoke and gas emission. Operation The wire is intended for operation at an ambient temperature of up to -50°С, relative air humidity of up to 100% at a temperature of up to 35°С. The wire can be laid without preheating at a temperature not lower than -15°C. The minimum bending radius during installation must be at least 10 times the outer diameter of the wire. The allowable heating temperature of the wire cores during operation was 70°C. The service life of the wire is 15 years.