Adapter SDSmax 195mm VERSIO S&R (209007421)

Description

The adapter is an element of the VERSIO modular system for increasing the working length of the tool by means of extensions with an SDS-max shank. The design of the adapter effectively transfers the impact force from the tool, which allows you to quickly and without energy loss perform deep holes with a diameter of 28 to 125 mm. The S & R SDS-max VERSIO adapter is used with: VERSIO crowns VERSIO extension VERSIO 30 x 150 auger drill VERSIO 35 x 150 auger drill VERSIO 40 x 150 auger drill VERSIO 45 x 150 auger drill VERSIO 55 x 150 auger drill VERSIO 68 x 150 auger drill VERSIO 80 x 150 auger drill When performing drilling work, it is necessary to lubricate the tool shanks. When drilling holes to a depth of more than 450 mm using prefabricated systems, it is necessary to perform preliminary drilling with drills of short length to a depth of at least 150 mm, after which a longer tool is used. This will not only protect the tool from breakage, but also increase the drilling speed, since the impact energy from the power tool used will be transmitted to the drill tip with minimal losses. As a result, drilling will be fast and accurate, and drilling will be as productive as possible due to the minimal manifestation of the vibration effect and the correct distribution of the impact energy of the power tool in the system. When drilling to a depth of more than 450 mm in the horizontal plane and especially the vertical plane in the downward direction, it is necessary to periodically perform reverse movements along the incomplete extraction of the working tool from the hole in order to remove accumulated slag in the hole. This will speed up the process of removing slag from the hole, which means increasing the drilling productivity of the tool.