Cable KVVHng 2x0.75 control EUROPAN CABLE (Т043239)

Description

Cable KVVGng 2x0.75 control EUROPAN CABLE (T043239)¶¶KVVGng – Control cable with copper conductors, polyvinyl chloride insulation and a sheath that does not support combustion.¶Scope¶Intended for fixed connection to electrical devices, apparatus, terminal assemblies of electrical switchgear with a nominal alternating voltage of up to 660 V, a frequency of up to 100 Hz or a constant voltage of up to 1000 V.¶Used for laying in rooms, channels, tunnels, in aggressive environments, in the absence of mechanical effects on the cable. The cable can be laid outdoors provided that it is protected from mechanical damage and direct sunlight. It is allowed to lay the cable in the ground (trenches) provided that the cable is protected at the points of exit to the surface.¶The index "ng" means that this cable does not support the spread of combustion, which is especially important in places with a high probability of ignition and increased safety requirements.¶Construction¶Conductors - copper, single-wire (class 1 DSTU EN 60228).¶Insulation - polyvinyl chloride plastic compound.¶Outer sheath - polyvinyl chloride plastic compound, which does not support combustion.¶Operation¶The cable is designed for stationary operation at an ambient temperature of -50°C to +50°C, relative humidity up to 98% at a temperature of up to 35°C, including for laying outdoors.¶The cable can be laid without preheating at a temperature not lower than -15°C.¶The bending radius of the cable when laid at an ambient temperature not lower than 0°C, is not less than:¶- three cable diameters - for cables with an outer diameter up to 10 mm inclusive;¶- four cable diameters – for cables with an outer diameter of over 10 to 25 mm inclusive.¶- six cable diameters – for cables with an outer size of over 25 mm.¶The continuous permissible heating temperature of the cable cores during operation is 70°C.