Cable VVGngd-1 1x120 power copper EUROPAN CABLE (53172)

Description

VVGNGD-1 1x120 Cable Cable Cable VVGNGD is a power cable with copper veins, polyvinyl chloride insulation and a shell that does not support combustion with reduced smoke and gas. Scope Designed for the transmission and distribution of electricity in stationary installations at nominal AC voltage of 0.66; 1 kV frequency 50 Hz. It is used for laying in blocks, on specialized cable trestles, can be used in industrial premises, in distribution and lighting devices, as well as in conventional living quarters as wiring. The NGD Cable is most suitable for use in places with increased ignition and where special fire -fighting measures are required to protect people. Additional cable property is non -combustibility and low smoke during high temperatures. Construction Conductive wires - copper, single -wire or multi -wire (class 1, 2 DSTU EN 60228). Insulation - polyvinyl chloride plastic. The outer shell is a polyvinyl chloride plastic that does not support combustion with reduced smoke and gas. Operation The cable is intended for stationary operation at an ambient temperature from -50 ° C to +50 ° C, relative humidity up to 98% at temperatures up to 35 ° C, including for outdoor laying. The cable can be laid without preheating at a temperature not lower than -15 ° C. The minimum bending radius during installation should be at least 10 times the outer diameter of a single-wire and 7.5-fold outer diameter of the multi-stranded cable. The allowable cable heating temperature during operation of 70 ° C continued and the maximum allowable temperature at short circuit currents 160 ° C. It is permissible to heat the cable vein in the emergency mode not exceeding 80 ° C.