Cable VVPng 3x2.5 mounting EUROPAN CABLE (55648)

Description

Cable VVPng 3x2.5 EUROPAN CABLE installation. VVPng – a wire with copper conductors, polyvinyl chloride insulation and a sheath that does not support combustion. Scope Designed for the transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 380/660 or a direct voltage of up to 1000 V. Used for the installation of electrical circuits in walls, hollow channels of building structures, on boards, for laying in plaster in damp or dry rooms, for the installation of lighting and power networks. The index "ng" means that this wire does not support the spread of combustion, which is especially important in places with a high probability of ignition and increased safety requirements. Design Current-conducting conductors - copper, single-wire (class 1 DSTU EN 60228), located in the same plane parallel to each other. Core insulation - polyvinyl chloride plastic compound. Sheath – polyvinyl chloride plastic compound, which does not support combustion. Operation The wire is intended for stationary operation at ambient temperatures from -40°C to +40°C. The wire can be laid without preheating at a temperature not lower than - 15°C. The minimum bending radius during installation must be at least 10 of the smallest external dimensions of the wire. The permissible continuous heating temperature of the wire cores during operation is 70°C.