Wire APVngd 150 EUROPAN CABLE (68005)

Description

Wire APVngd 150 EUROPAN CABLE APVngd is a wire with an aluminum core and polyvinyl chloride insulation, which does not support combustion with reduced smoke and gas emission. Scope Intended for electrical installations during stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools for a nominal voltage of up to 450 V (for networks up to 450/750 V) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V. Used for laying in steel pipes, hollow channels of building structures, on trays, for the installation of electrical circuits, for the installation of indoor lighting networks, for the installation of power lines that cannot be moved. If external wiring is required, it is necessary to use trays, boxes, cable channels that protect the wire from mechanical damage and ultraviolet radiation. The wire with the "ngd" index is most suitable for use in places with an increased probability of ignition and where special fire protection measures are required to protect people. An additional property of the wire is non-flammability and low smoke emission when exposed to high temperatures. Construction Conductors - aluminum, single-wire or multi-wire (class 1, 2 DSTU EN 60228). Insulation made of polyvinyl chloride plastic, which does not support combustion with reduced smoke and gas emission. Operation The wire is designed for operation at ambient temperatures up to -50°C, relative humidity up to 100% at temperatures up to 35°C. The wire can be laid without preheating at a temperature not lower than -15°C. The minimum bending radius during installation must be at least 10 times the outer diameter of the wire. The permissible continuous heating temperature of the wire cores during operation is 70°C.