Wire VVPngd 3x1.5 mounting EUROPAN CABLE (51556)

Description

Wire VVPngd 3x1.5 mounting EUROPAN CABLE. VVPngd - a wire with copper conductors, polyvinyl chloride insulation and a sheath that does not support combustion with reduced smoke and gas emission. Scope Intended for the transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 380/660 or a direct voltage of up to 1000 V. Used for the installation of electrical circuits in walls, hollow channels of building structures, on boards, for laying in plaster in damp or dry rooms, for the installation of lighting and power networks. The wire with the index "ngd" is most suitable for use in places with an increased probability of ignition and where special fire protection measures are required to protect people. An additional property of the wire is non-flammability and low smoke emission when exposed to high temperatures. Construction Conductor cores - copper, single-wire (class 1 DSTU EN 60228), located in the same plane parallel to each other. Core insulation - polyvinyl chloride plastic compound. Sheath - polyvinyl chloride plastic compound, which does not support combustion with reduced smoke and gas emission. Operation The wire is designed for stationary operation at an ambient temperature of -40°C to +40°C. The wire can be laid without preheating at a temperature not lower than - 15°C. The minimum bending radius during installation must be at least 10 of the smallest external dimensions of the wire. The continuous permissible heating temperature of the wire cores during operation is 70°C.